Introduction - Cabletron Systems SmartSwitch 9A100 Installation And Setup Manual

1 INTRODUCTION

Welcome to the SmartSwitch 9A100 Installation and Setup Manual. The SmartSwitch 9A100 ATM switch is a module
that fits into the SmartSwitch 9000 chassis. You can install up to seven SmartSwitch 9A100 switches into a 14-slot
SmartSwitch 9000 chassis; or up to three switches into a 6-slot chassis. The module is hot swap-able, meaning that you
can install and remove it without turning off or disconnecting the chassis. This manual will help you quickly and easily
install and configure your SmartSwitch 9A100 switch.
This manual provides instructions for installing and setting up the SmartSwitch 6A000 ATM switch module.
This manual provides information about
•
Unpacking and inspecting your switch module
•
Installing your switch module in the SmartSwitch 9000 chassis
•
Configuring your switch to be functional on your network
•
Using the command line console
•
Using the SmartSwitch ATM Administrator graphical network management software
•
Obtaining customer support
This manual also provides detailed mechanical, electrical, and performance specifications for the SmartSwitch 9A100
ATM switch module.
Note For additional information about using the SmartSwitch 9A100, see the
SmartSwitch ATM User Guide. For a complete explanation of all SmartSwitch
9A100 console commands, see the SmartSwitch ATM Switch Reference Manual.
SmartSwitch 9A100 Installation and Setup Guide 1-1