Mgbic-Lc09 Specifications (1000Base-Lx; Mgbic-08 Specifications (1000Base-Elx; Mgbic-Lc09 Optical Specifications; Mgbic-Lc09 Operating Range - Enterasys Matrix 7G4280-19 Hardware Installation Manual

MGBIC-LC09 Specifications (1000BASE-LX)

Table A-7 MGBIC-LC09 Optical Specifications
Item
Transmit Power (minimum)
Receive Sensitivity
Link Power Budget
Table A-8 MGBIC-LC09 Operating Range
Item
62.5 µm MMF
50 µm MMF
50 µm MMF
10 µm SMF

MGBIC-08 Specifications (1000BASE-ELX)

Table A-9 MGBIC-08 Optical Specifications
Item
Transmit Power (minimum)
Receive Sensitivity
Maximum Input Power
Link Power Budget
(Full Duplex Only)
1. The maximum drive distance (up to 70 km) depends on the quality of the installed single-mode fiber-
optic cable segment. Use the Link Power Budget to calculate the maximum cable length of the
attached segment. The Link Power Budget must not exceed those specified in this table. The
MGBIC-08 input power must not exceed -3 dBm. Otherwise, saturation could occur.
Table A-10 MGBIC-08 Operating Range
Item
9 or 10 µm SMF
62.5 µm MMF
-11.5 dBm
-20 dBm
8.5 dBm
Modal Bandwidth @
1300 nm
500 MHz/km
400 MHz/km
500 MHz/km
N/A
-0 dBm, min.
-24 dBm, min.
-3 dBm
1
23 dBm
1550 nm
N/A
Gigabit Ethernet Specifications
50 µm MMF
-11.5 dBm
-20 dBm
8.5 dBm
Range
2-550 Meters
2-550 Meters
2-550 Meters
2-10,000 Meters
+2 dBm, typical
-26 dBm, typical
28 dBm, typical
Range
70,000 Meters
DFE-Platinum Series Hardware Installation Guide A-5
10 µm MMF
-9.5 dBm
-20 dBm
10.5 dBm
+5 dBm, max.