Connecting To A Vt Series Terminal; Connecting An Ibm Pc Or Compatible - Enterasys Matrix DFE-Gold 4G4202-60 Hardware Installation Manual

Figure 3-9
➀
UTP straight-through cable with RJ45 connectors
➁
RJ45 COM port

Connecting to a VT Series Terminal

To connect a VT Series terminal to an Enterasys Networks DFE‐Gold module COM port
(Figure 3‐10), use a UTP straight‐through cable with RJ45 connectors and an RJ45‐to‐DB25
female adapter, and proceed as follows:
1. Connect the RJ45 connector at one end of the UTP straight‐through cable
COM port
2. Plug the RJ45 connector at the other end of the UTP straight‐through cable
RJ45‐to‐DB25 female adapter
3. Connect the RJ45‐to‐DB25 adapter

Connecting an IBM PC or Compatible

à Â
➁
on the Enterasys Networks module.
➂
Enterasys Matrix DFE-Gold Series Modules Hardware Installation Guide
À
➂
➃
.
➂
to the port labeled COM on the VT terminal
RJ45-to-DB9 PC adapter
IBM PC or compatible device
➀
to the
➀
Á
into the
➃
.
3-17