Operation Panel
9.3
Operation Panel
I
This component is not hot replaceable.
Ê At the rear of the storage subsystem, switch off the power supply units using
their power switches.
Ê Remove the AC cord clamps and remove the leads.
Ê Remove the flange cover capping the operation panel.
I
Record the slot positions of the disks to be removed in the next step.
Ê Remove some disks nearest to the operation panel in order to have free
mounting place for unscrewing the operation panel.
Operation panel
Figure 33: Screw to be loosened for removing the 2.5" operation panel
64
Operating Manual
Replacing Components
ETERNUS JX40 S2