Important Notes
2.2
Electrostatic-sensitive Component Label
Electrostatic-sensitive components may be identified by the following sticker:
Figure 1: Electrostatic-sensitive component sticker
You must follow the instructions below when handling modules containing
electrostatic-sensitive components
Ê Discharge static electricity from your body (for example by touching a
grounded metal object) before handling modules containing electrostatic-
sensitive components.
Ê The equipment and tools you use must be free of static charge.
Ê Remove the power plug before installing or removing modules containing
electrostatic-sensitive components.
Ê Only hold modules containing electrostatic-sensitive components by their
edges.
Ê Do not touch any of the pins or track conductors on a module containing
electrostatic-sensitive components.
Ê Use a grounding strap designed for the purpose, to connect you to the
system unit as you install the modules.
Ê Place all components on a static-safe base.
I
An exhaustive description of the handling of modules containing
electrostatic-sensitive components can be found in the relevant
European and international standards (DIN EN 61340-5-1, ANSI/ESD
S20.20).
ETERNUS JX40 S2
Electrostatic-sensitive Component Label
Operating Manual
17