Fault Clearing - Fujitsu ETERNUS JX40 S2 Operating Manual

8

Fault Clearing

V
CAUTION!
Please note the safety instructions in
page 15.
If a fault occurs, attempt to rectify it in accordance with the measures set out
below:
● Which are described in this chapter,
● Which are described in the documentation for the connected server and the
RAID controller or HBA used.
If you cannot rectify the fault, proceed as follows:
Ê Note the steps that you have performed and the state which was active when
the error occurred. Note also any error message which may have been
displayed.
Ê Contact our service organization.
ETERNUS JX40 S2
chapter "Important Notes" on
Operating Manual 57