Installation; Installation Steps - Fujitsu ETERNUS JX40 S2 Operating Manual

3

Installation

3.1

Installation Steps

V
CAUTION!
The storage subsystem should not be subjected to any extreme
environmental conditions (see
Protect it from dust, moisture and heat.
The following installation steps are described in detail in other sections of this
chapter:
Ê Unpacking the storage subsystem.
Ê Inserting the storage subsystem into the rack.
Ê Cabling the storage subsystem (see
Ê Setting the desired system parameters.
Ê Connecting the storage subsystem to the mains voltage (see
Supply Connection" on page
Ê Switching ON the storage subsystem (see
Subsystem ON/OFF" on page
ETERNUS JX40 S2
section "Technical Data" on page
section "SAS Connection" on page
49).
section "Switching the Storage
31).
Operating Manual
12).
47).
section "Power
23