Checking Network Settings - Viessmann Vitocom 100 LAN1 Installation And Service Instructions Manual

Operation with Vitodata 100 user interface
Forwarding messages
Pending messages in the heating sys-
tem, e.g. sensor or burner faults, are
transferred via LON to the Vitocom 100.
The Vitocom 100 transmits these mes-
sages to the Vitodata server. The mes-
sages can be displayed on the Vitodata
100 user interface. If recipients (email,
fax or SMS) are stored on the Vitodata
server, the messages are automatically
forwarded to these recipients.
Note
The Vitodata fault management internet
service is required for forwarding mes-
sages by fax or SMS (Vitocom 100
standard delivery, free of charge for
3 years).

Checking network settings

Have the following settings on the DSL
router checked, and if necessary adjus-
ted, by an IT expert:
■ Dynamic IP addressing (DHCP) must
be enabled.
■ Port 80 and port 443 must be
approved for outgoing connections.
Preparing for installation
(cont.)
Content of messages
■ Date and time
■ System description
■ Message text
■ Fault code
■ System status
Heat source installation and serv-
ice instructions
11