Installation
2.
Mount the ground cable as shown in
Illustration 3.8.
3
3
Illustration 3.8 Mounting the Ground Cable
3.
Insert the mains cables to the mains plug and
tighten the screws as shown in Illustration 3.9.
Illustration 3.9 Mounting the Mains Plug
12
4.
Illustration 3.10 Mounting the Support Bracket
Relays and terminals on enclosure size H10
Illustration 3.11 Enclosure Size H10
IP20, 600 V, 11–15 kW (15–20 hp)
08/2020 All rights reserved.
Mount the support bracket across the mains
cables and tighten the screws as shown in
Illustration 3.10.
BAS-SVX58D-EN