Installation
Relays and terminals on enclosure size H8
1 Mains
2 Relays
3 Ground
4 Motor
Illustration 3.5 Enclosure Size H8
IP20, 380–480 V, 90 kW (125 hp)
IP20, 200–240 V, 37–45 kW (50–60 hp)
IP20, 525–600 V, 75–90 kW (100–125 hp)
Connecting to mains and motor for enclosure size H9
Illustration 3.6 Connecting the Frequency Converter to the
Motor, Enclosure Size H9
IP20, 600 V, 1.5–7.5 kW (2.0–10 hp)
BAS-SVX58D-EN
TR150 and TR170 Quick Guide
Complete the following steps to connect the mains cables
for enclosure size H9. Use the tightening torques described
in chapter 3.2.1 Electrical Installation in General.
1.
Illustration 3.7 Mounting the Mounting Plate
08/2020 All rights reserved.
Slide the mounting plate into place and tighten
the 2 screws as shown in Illustration 3.7.
3
3
11