STEP 4
Cut the pipe
Push and twist the saddle valve body into the
threaded hole in the front plate, then wind
clockwise until almost fully wound.
Lock the body in place by tightening the locking
nut against the front plate with a spanner.
Visit: kubewater.co.uk
STEP 5
Attach the 3/4" adaptor
Attach the 3/4" adaptor to the 3/4" male thread
on the saddle valve by turning clockwise.
Kube Drinking Water Filter
Pantone 1235
Pantone 185 Pantone Process Blue
Pantone 360 Pantone Cool Grey 10
09
Installation Instructions