Installation Pre-Check - Kinetico Kube Installation Instructions Manual

Installation pre-check

The installation kit includes a saddle valve for a 15mm copper pipe. For
any further assistance please contact Kinetico on 0808 164 2019.
CAUTION:
• Do not use the Kube with water that is
microbiologically unsafe or of unknown
quality.
• The Kube Drinking Water System must be
properly located and installed in accordance
with these Installation Instructions.
• Use the Kube on a safe-to-drink, COLD water
supply only.
If in doubt, give us a call on 0808 164 2019, we are here to help.
Visit: kubewater.co.uk
• Do not install on a HOT WATER supply.
• Do not install the Kube outside or anywhere it
is likely to freeze, water freezing in the system
may cause damage. The temperature of the
water supply to the Kube must be above 2°C.
• The Kube will withstand up to 6 bar water
pressure.
• To order replacement filters visit kinetico.co.uk
Kube Drinking Water Filter
Pantone 1235 Pantone 185 Pantone Process Blue Pantone 360 Pantone Cool Grey 10
05
Installation Instructions