Kinetico Kube Installation Instructions Manual page 10

Pantone 1235 Pantone 185 Pantone Process Blue Pantone 360 Pantone Cool Grey 10
STEP 6
Secure the filter head
Attach the filter head to the side of your kitchen
cupboard, ensuring there is a minimum of 35cm
clearance below the filter head to allow for easy
removal and replacement of the filter cartridge.
35
cm
STEP 7
Cut the tubing
Measure the length of tubing required from the
saddle valve to the left hand connection on the
filter head, allowing for a bit of slack.
Taking care not to kink the tubing, use a sharp
utility knife to make a perpendicular cut at the
correct length.
10
Kube Drinking Water Filter
Installation Instructions
STEP 8
Connect the water supply
Push the cut length of tubing all the way into
the adaptor fitted to the saddle valve. Pull
back to check it is secure.
1.55
Visit: kubewater.co.uk