Operation - Cuisinart Smart Stick CSB-87C Instruction And Recipe Booklet

4. Place the chopping/grinding blade into center of the work bowl
over metal blade shaft.
5. Place the motor body housing with cover on top of the work bowl
and rotate clockwise to lock into place.
6. Plug the power cord of the hand blender into an electrical outlet.

OPERATION

Do not hold LOCK/UNLOCK button down once the blender is operating.
1. Press and hold the
LOCK/UNLOCK
.
button
BLENDING
The specially designed blade is for mixing and puréeing all kinds of
foods, including salad dressings, powdered drink products, soups and
sauces, and blended drinks like milkshakes or smoothies.
This blade mixes and stirs while adding only a minimum of air to your
mixture. A gentle up-and-down motion is all you need to make the
most flavorful, full-bodied recipes. Be careful never to remove the
blending shaft from the liquid while in operation.
1. Connect the blending shaft to the motor body housing.
2. Plug electrical cord into a wall socket.
3. Immerse the blade end of blending shaft into mixture to be blend-
ed. You can blend in the 3-cup (750 ml) beaker, bowl, pot,
saucepan or pitcher.
4. Turn the variable speed control to the speed recommended
in your recipe. NOTE: Blending speed can change while blending.
5. To turn the blender on:
See Operation Illustration 1, 2, 3 above.
1. Press and hold the LOCK/UNLOCK button.
2. Then Press and hold the ON/OFF button.
3. Release the LOCK/UNLOCK button while continuing to
hold down the ON/OFF button.
NOTE: Do not continuously blend for longer than 60 seconds.
Release ON/OFF button for 20–30 seconds between 60-second
blending cycles.
6. Unplug immediately after use.
2. Then press and
hold the ON/OFF
button.
9
3. Release the LOCK/
UNLOCK button while
continuing to hold down
the ON/OFF button.