Electrical; Electrical Supply - Sirius Range Hoods SU906 Installation Instructions Manual

The ducting connection to the hood must
be in line with the central vertical axis of the
range hood, 1" away from the back wall on
which the hood is to be mounted.
Range hoods may interrupt the proper flow
of combustion gases from fireplaces, gas
furnaces and gas water heaters.
To minimize the risk of drawing these lethal
gases back into the home, please follow the
heating equipment manufacturers safety
standards and guidelines carefully.
Refer to NFPA and ASHRAE for additional
information.
With gas range or gas cook top a 8" round
connection is recommended.
WARNING: All electrical work must be
performed by a qualified electrician.
Please ensure that the appropriate electrical
codes or prevailing local building codes and
ordinances are adhered to.
Ensure that the electricity supply is discon-
nected at source. Do not use an extension
cord or adapter plug with this appliance.
This appliance must be grounded. Connect
to a properly grounded branch circuit, pro-
tected by a 15 amp circuit breaker.
E L E C T RIC A L

Electrical Supply.

This appliance requires 120V/60Hz, 3amp
electrical supply – ensure an appropriately
qualified person completes the electrical ho-
ok-up. The connection point for the electrical
supply is at the top of the unit, therefore the
electrical supply must be run down from the
ceiling alongside the ductwork.
All electrical and venting hook-ups must be in
place before commencing installation of the
hood-fan.
11