Sirius Range Hoods SU906 Installation Instructions Manual

Built-in range hoods
Hide thumbs Also See for SU906:

Advertisement

INSTALLATION INSTRUCTIONS
CARE AND USE MANUAL FOR:
BUILT-IN RANGE HOODS
Models covered by this instructions:
SU906 SUTC919 SUETC919
*** BEFORE INSTALLATION ***
ENSURE THERE IS NO VISIBLE OR HIDDEN DAMAGE SUSTAINED DURING SHIPPING
*** SHIPPING DAMAGE ***
MUST BE REPORTED WITHIN 5 DAYS OF RECEIPT

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SU906 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Sirius Range Hoods SU906

  • Page 1 INSTALLATION INSTRUCTIONS CARE AND USE MANUAL FOR: BUILT-IN RANGE HOODS Models covered by this instructions: SU906 SUTC919 SUETC919 *** BEFORE INSTALLATION *** ENSURE THERE IS NO VISIBLE OR HIDDEN DAMAGE SUSTAINED DURING SHIPPING *** SHIPPING DAMAGE *** MUST BE REPORTED WITHIN 5 DAYS OF RECEIPT...
  • Page 8 WAR NIN G Thank you for purchasing a Sirius Range Hood. Please read all the instructions in this manual before installing the appliance. Save these instructions for future reference. Only use this appliance as an exhaust ventilation system for the re- moval of cooking vapors.
  • Page 9: Table Of Contents

    TABLE OF CONTENTS BEFORE YOU BEGIN DUCTING External venting Requirements ELECTRICAL Electrical Supply INSTALLATION Installation SU906 Installation SUTC919 OPERATING PROCEDURES General Advice Functions MAINTENANCE Cleaning the Filter Cleaning the Hood Substitution of the LED bar WARRANTY...
  • Page 10: Before You Begin

    B E FOR E Y O U B E G IN The manufacturer declines all responsibility BEFORE YOU BEGIN: It is advisable to in the event of failure to observe the instruc- test run the range hood before installa- tions given here for installation, maintenan- tion.
  • Page 11: Electrical

    The ducting connection to the hood must be in line with the central vertical axis of the range hood, 1” away from the back wall on which the hood is to be mounted. Range hoods may interrupt the proper flow of combustion gases from fireplaces, gas furnaces and gas water heaters.
  • Page 12: Installation

    (Fig. 2) them at the end of the installation. SU906 (520mm) 501 X 265mm - 19” X 10” 23/32 14/32 SU906 (850mm) 835 X 265mm - 32”...
  • Page 13: Installation Sutc919

    Warning! Installation SUTC919 Before connecting the flexible exhausting pipe to the motor, make sure the stop valve, Remove the grease filters before installing which is on the air outlet of the motor, can the product, in order to avoid damage to the swing.
  • Page 14 Place the appliance inside the cabinet and Filtering version fix it by inserting the screws supplied into the Connect the flange with a pipe suitable to holes, as shown in fig. 19. convey the air to the top of the cabinet. Con- nect the appliance with the electrical mains Both in the front and rear side of the applian- through the supply cord.
  • Page 15: Operating Procedures

    O PE R AT I N G PR O C E DU RES Read all the instructions before operating FUNCTION the appliance. Save these instructions for future reference. Mod. SU (Fig. 30). A: Light ON/OFF button General Advice. B: Blower Speed 1 (low) or OFF Ensure that the grease filters are in place.
  • Page 16 Filter requires washing indicator: after 30 hours of use, all the buttons will light up to remind you that the grease filter should be cleaned. Follow the instructions for cleaning filters in this booklet. Once the grease filters have been cleaned and replaced, reset by pressing the timer button (F).
  • Page 17: Maintenance

    M A I N TE N A NCE The hood-fan should provide many years of trouble free service provided it is maintained properly. Cleaning the Filter. Clean the grease filter either by carefully hand washing, (so as not to damage the filter design) or preferably in a dishwasher.
  • Page 18: Substitution Of The Led Bar

    Substitution of the LED bar: Using an appropriate tool, remove the LED bar from its seat, disconnect it electronically using the appropriate connector, then substi- tute it with a LED bar with same characteri- stics.
  • Page 19: Warranty

    Three Year Limited Warranty YOU MUST REGISTER THE PURCHASE OF YOUR PRODUCT ON LINE AT www.siriuscappe.com/usa/warranty.htm TO CONVALIDATE YOUR WARRANTY. YOU CAN FIND THE DATA OF YOUR HOODS ON A LABEL INSIDE THE HOOD. JUST REMOVE THE GREASE FILTER TO READ IT. WARRANTY SERVICE To qualify for warranty service, you must notify Sirius After sale service at the email address stated below or call toll free USA 1-877-474-8770 and provide the model number, description...

This manual is also suitable for:

Sutc919Suetc919

Table of Contents