Pari MHL T Instructions For Use Manual page 63

Determination of aerosol output
The aerosol output is the quantity of aerosol that the nebuliser
system produces with a given fill volume.
Parameter
Fill volume
Test solution
Test instrument PARI COMPASS breathing simulator
Measurement
time
Aerosol output
at minimum flow (3 l/min)
at maximum flow (6 l/min)
1) Averages from each of two individual measurement series with three
nebuliser­compressed air combinations
Determination of the aerosol output rate
The aerosol output rate is the quantity of aerosol that the
nebuliser system produces in a given time.
Parameter
Fill volume
Test solution
Test instrument
Measurement time
Aerosol output rate
at minimum flow (3 l/min)
at maximum flow (6 l/min)
1) Averages from each of two individual measurement series with three
nebuliser­compressed air combinations
– 63 –
2 ml
Sodium fluoride (1%)
Until the exiting aerosol stream becomes
irregular, plus 1 min.
1)
2 ml
Sodium fluoride (1%)
PARI COMPASS breathing simulator
1 minute
1)
0.14 ml
0.15 ml
0.05 ml/min
0.11 ml/min
en