Filling With Medication - Pari MHL T Instructions For Use Manual

3.2 Filling with medication

For optimum aerosol generation, fill the nebuliser with at
least 3 ml medication.
NOTICE
Take care to ensure that the cap only moves in the direction al­
lowed by the hinge. Otherwise the nebuliser cap might snap
off.
• Insert the nebuliser in the holder on the compressor inten­
ded for this purpose.
• Open the nebuliser cap by
pressing your thumb against
the underside of the cap.
• Pour the quantity of medication
prescribed by your doctor into
the nebuliser nozzle
attachment.
Be sure to follow the
instructions regarding the
minimum and maximum fill
volumes in [see also:
6.3 Technical data]. If the
nebuliser contains too little or
too much medication,
nebulisation, and thus also the
treatment, will be greatly
impaired.
• Close the nebuliser cap.
Make sure that the cap snaps into place.
– 46 –