Table of Contents
Advertisement
4.18 Setting Telephone Numbers for Toll Saver
This feature allows you to assign up to 2 Caller ID numbers and a DID number for Toll Saver
(see "Toll Saver" in the Glossary). When you check your mailbox from the assigned Caller ID
numbers or by dialing the assigned DID number, the VPS notifies you whether or not there is
a new message in your mailbox by changing the delayed answer time. You can reduce your
telephone charges by accessing your mailbox only when there is a new message.
•
DID number setting for this feature is only available when the VPS is connected to the
KX-TD500 (V4M or higher) with DPT Integration (see "DPT Integration" in the Glossary).
•
If you cannot use this feature, cannot assign Caller ID numbers, or cannot assign a DID
number, ask your System Administrator or System Manager. She might have disabled it.
Subscriber's
Main Menu
Log into your mailbox.
TO SET CALLER ID NUMBER 1 AND 2
To change Caller ID Number 1
1
To change Caller ID Number 2
2
Make your selection.
WHEN YOU WANT TO CHANGE THE TELEPHONE NUMBER
1
Press 1
to change.
TO SET A DID NUMBER
FOR THE FIRST TIME
Telephone No.
Enter the telephone
number and wait.
2
Press 2
to accept.
•
Depending on your telephone system, you can enter up to 20 digits using the keys 0-9
and
•
Please make sure you begin the telephone number with a Line Access Code (to seize a
CO line).
5
Press 5.
New Telephone No.
Enter the new telephone
number and wait.
WHEN YOU WANT TO CHANGE THE TELEPHONE NUMBER
or
1
Press 1
to change.
On-hook.
for telephone numbers.
4.18 Setting Telephone Numbers for Toll Saver
TO SET CALLER ID
NUMBER 1 AND 2
7
or
TO SET DID NUMBER
Press 7.
FOR THE FIRST TIME
or
Telephone No.
Enter the telephone
number and wait.
2
Press 2
On-hook.
to accept.
New Telephone No.
Enter the new telephone
number and wait.
Subscriber's Guide
53
Advertisement
Table of Contents
