Table of Contents
Advertisement
4.8
Message Waiting Notification
The VPS is able to notify you when a new message has been recorded in your mailbox. There
are 3 ways by which the VPS notifies you: (1) Message Waiting Lamp on your proprietary
telephone, (2) a call to another telephone (e.g., your mobile phone), or (3) your beeper. You
can assign time frames to each of these devices.
The VPS is also able to notify your beeper with the callback number of the party who left the
message. The telephone number stored on the VPS for your beeper must include the beeper
display command.
Three features can be set for message waiting notification: Message Waiting Lamp Status,
Change Device Status, and Assign Telephone Number. These features can be set by the
System Administrator or at a subscriber telephone. You must enter a distinct phone number
to each device.
•
The System Administrator or the System Manager must authorize this feature before
it can be used.
•
Message Waiting Lamp Notification Setting
The VPS illuminates the message waiting lamp of your extension when your mailbox
has a new message recorded.
•
Setting Device Status
For each device, the notification can be continuous, disabled, or enabled to a preset
schedule. Only the System Administrator can set the notification to a preset schedule.
•
Notification Number Assignment
You can set up to 3 telephone or beeper numbers to ring when you wish to receive
notification calls.
Subscriber's
Main Menu
Log into your mailbox.
WHEN YOU PRESS 1
WHEN YOU PRESS 2
Enter the device number (1-3).
6
2
Press 6.
Press 2.
1
To change
2
To accept
Make your selection.
1
2
Device No.
3
4.8 Message Waiting Notification
To change the Message Waiting
1
Lamp Status
To change the Device Status
2
3
To assign a telephone or beeper no.
Press the desired button.
On-hook.
To use for scheduling
To use continuously
To not use at all
Select the status.
On-hook.
Subscriber's Guide
39
Advertisement
Table of Contents
