Spirit 16007604850-1 Owner's Manual page 9

'
STEP 1
1. Gather HARDWARE FOR STEP 1.
2. Take 6 Speed NUT CLIPS (128) and attach them at the front and each side of the unit as shown left.
3. Guide the right upright through FRAME BASE COVER RIGHT (62) and CONSOLE MAST
4. COVER RIGHT (67).
5. Next, take the RIGHT UPRIGHT (4) and attach the MIDDLE COMPUTER CABLE (50) to the LOWER
COMPUTER CABLE (49). Be careful not to pinch the cable, or damage may occur to the system.
6. Slide the right upright (4) to sit into the frame base.
7. Repeat from step 3 for the left side.
8. Having inserted RIGHT AND LEFT UPRIGHTS (4, 5) into the FRAME BASE (2), use the
COMBINATION M5 ALLEN WRENCH AND PHILLIPS HEAD SCREWDRIVER (131) to tighten 8
BUTTON HEAD SOCKET BOLTS (130), securing the uprights to the frame base.
HARDWARE
#130. 5/16" × 15mm
Button Head Socket
Bolt (8 pcs)
Customer Service 1-888-707-1880
Email: customerservice@dyaco.ca
#128. M5 Speed Nut
Clip (6 pcs)
9
Dyaco Canada Inc. 2016