STEP 4
1. Gather HARDWARE FOR STEP 4.
2. Slide CONSOLE MAST COVER RIGHT AND LEFT (67, 66) up the uprights. Secure them with
3. 8 SHEET METAL SCREWS (142) using the PHILLIPS HEAD SCREWDRIVER (148).
4. Place the HANDRAIL SUPPORT (119) between the LEFT AND RIGHT UPRIGHTS (5, 4) and use the
5. COMBINATION ALLEN WRENCH & PHILLIPS HEAD SCREWDRIVER (131) to tighten 4 BUTTON
HEAD SOCKET BOLTS (150). Install the BEVERAGE HOLDER (121) onto the HANDRAILS SUPPORT
(119).
Note: Please tighten all screws after all components have been assembled.
HARDWARE
#150. 5/16" x 3/4"
Button Head Socket
Bolt (4 pcs)
Customer Service 1-888-707-1880
Email: customerservice@dyaco.ca
#142. 3.5 x 16mm
Sheet Metal Screw
(8 pcs)
12
Dyaco Canada Inc. 2016