A&D MF-50 Instruction Manual page 38

Select an Analysis Mode
5. Press the
SELECT
will blink. Select
the or key. (Press these keys to select it)
↓ ↑
Set the Heating Pattern
6. Select drying temperature with the
Select ramp drying
with the
PROGRAM
Set the Final Drying Temperature
7. Set 160°C with the
Set the Ramp Time
8. Set 5.0 minutes with the
Set the Analysis Time
9. Set 10.0 minutes with the
Set a Measurement Unit
10. Select a measurement unit with the
key. Select moisture content (based on a wet
sample ) with the
Set the Minimum Scale Value of the % Display
11. Select the % display with the
Select 0.01 [%] with the
Set the Minimum Scale Value of the Gram Display
12. Select gram display with the
Select 0.001 [g] with the
Store the Parameters and Finish the Operation
13. Press the
ENTER
of the measurement program to program number 4.
Pressing the key, the weighing mode is
automatically displayed. When PROG 4 is recalled,
the settings can be used.
To cancel the new parameters and return to the
weighing mode, press the
key to select a symbol, it
of the timer mode with
U-t
SELECT
of the heating pattern
key.
or key.
↓ ↑
or key.
↓ ↑
or key.
↓ ↑
or key.
↓ ↑
SELECT
or key.
↓ ↑
SELECT
or key.
↓ ↑
key to store the new parameters
RESET
key.
Final drying temperature
Analysis time
SELECT
key.
Minimum scale
value of % display
key.
Minimum scale
value of gram
display
key.
36
Analysis mode
" U " - " t
0. 0 00
" 1 " 0 " 5 °C
Ramp drying
0. 0 00
" 1 " 6 " 0 °C
Ramp Time
1
" 5 ." 0 min
2
" 1 " 0 ." 0 min
Measurement unit
" 0 . " 0 " 0 " 1
160°C 0. 0 00
10.0 min
Gram display of
weighing mode
MS-70 / MX-50 / MF-50 / ML-50
0. 0 00
g
g
g
0 " M " O " I " S " T
" %
" / " W
" 0 . " 0 " 1
%
g
g