A&D MF-50 Instruction Manual page 25

1. Turn on the analyzer.
The gram unit (of weighing mode) is displayed.
Enter the Quick Mode
2. Press the
SELECT
mode and press the
Select ACCURACY
3. Press the
When
ACCURACY
4. Press the
↓
Set Drying Temperature at the Sample Pan
5. Press the
temperature.
6. Press the
↓
Store Parameters and Finish the Operation
7. Press the
The weighing mode is automatically displayed.
Put a Sample on the Pan
8. Put the breeze break ring, pan support, pan handle
and sample pan in order. (With no sample.)
9. Close the heater cover.
10. When displaying a stable value, Press the
Avoid mechanical vibration, breeze and environmental
noise during measurement. If it deviates from zero
display, press the
MS-70 / MX-50 / MF-50 / ML-50
key to display an analysis
or key to select
↓ ↑
key to select
SELECT
is selected, HI, MID. or LO blinks.
or key to select LO of ACCURACY.
↑
key to select the drying
SELECT
or key to set 130 °C.
↑
key to store the parameters.
ENTER
key.
RESET
Quick mode
.
quc
ML-50 does not display
ACCURACY.
Temperature
key.
RESET
23
Quick drying
ACCURACY
Preparation
Close