A&D MF-50 Instruction Manual page 51

"Measurement Unit"
Unit
Moisture content is based on
wet sample mass
Moisture content (Atro) is
based on dried sample mass
Dry content
Ratio
Gram value
W: Wet sample mass
1: Factory settings
2: When result reaches to 999%, measurement is stopped.
"Date"
It is printed date and time of the built-in clock in the analyzer.
Arrangement of the calendar is the same setting of the built-in clock.
Refer to ".5.2 Setting the Clock and Calendar "
If you need to adjust the clock, refer to ".5.2 Setting the Clock and Calendar "
DATEüü2003/08/01
TIMEüüüü13:24:57
"Remarks Space"
For instance: This space can use for a comment about samples.
REMARKS
ü-ü-ü-ü-ü-ü-ü-ü-
"Signature Space"
SIGNATURE
ü-ü-ü-ü-ü-ü-ü-ü-
MS-70 / MX-50 / MF-50 / ML-50
A Part of Print
UNITüüüüMOIST/üW
1
UNITüüüüMOIST/üD
UNITüüüRATIOüD/W
2
UNITüüüRATIOüW/D
UNITüüüüüüüüüüüg
D: Dried sample mass
49
Formula Display
W - D
% MOIST
x 100
W D
W - D
% MOIST
x 100
D D
D
% RATIO
x 100
W
W
% RATIO
x 100
D
-
g
/W/D
/W/D
D/W/D
D/W/D