Furuno FS-1562 Manual page 6

Equipment
AT-1560 Self test
System settings menu.
Channel presetting
FS-
5000/8000
Power adjustment
BFO setting
[F5] 6: AAB
DP-5 [F5] 7, 8, 9, 0: IDs
[F6]:Terminal
[F8]:System
[F5] 5: AAB
[F5] 6, 7, 8, 9: IDs
[F6]: System
DP-6
Quit to application softwear.
Terminal program update.
Main program up date.
Printer and Language settings.
Menu (Item)
iii
Pass word/key point
Turn on No.2 of the dip
SW S2 in the ATU, then
press the TUNE SW in the
ATU.
[STO] "system setting
item No." [ENT] " setting
No." [ENT].
To preset;
[STO] "CH No." [ENT]
[ENT].
To eras;
[STO] "CH No." [ENT]
[0] [ENT].
FULL power;
[STO] [FULL] adjust to
power by [FULL] or
[UP] key.
LOW power
[STO] [LOW] adjust to
power by [FULL] or
[UP] key.
[STO] [BFO]
Re-enter AAB;
Type "ANSWER CODE"
(Type Cap. letter)
Re-enter IDs;
Type "ID CODE"
(Type Cap. letter)
Changing system settings
Type "DP5"
(Type Cap. letter)
Re-enter AAB;
Type "ANSWER CODE"
(Type Cap. letter)
Re-enter IDs;
Type "ID CODE"
(Type Cap. letter)
Changing system settings
Type "DP6"
(Type Cap. letter)
[Fn ]+ [F2] + [Alt]
B:\>install
B:\>
Type "nbdpinst",
press [F1],
type "nbdp.exe".
[Fn ]+ [F1], type "DP6".
(Type Cap. letter)
Note
To conform System
settings [RCL] 9999
[ENT].
To conform user CH
setting [RCL] 9998
[ENT].
To keep "1700Hz".
Ver 16 or later