Furuno FS-1562 Manual page 428

5. Install the terminal program by using "INSTALL.BAT" file contained in the program.
Press the keys successively according to the terminal to be changed to as follows:
FELCOM-11
- [I],[B],[I],[N],[S],[T] and [Enter]
FELCOM-12
- [I],[B],[I],[N],[S],[T] and [Enter]
FELCOM-81
- [I],[N],[S],[T],[A],[L],[L] and [Enter]
DP-6
- [I],[N],[S],[T],[A],[L],[L] and [Enter]
Programs will be installed automatically. With some terminal programs, follow the
installation instructions that will be shown on the display.
6. When the program has been installed, the prompt "B:¥>" will appear. Then turn off
power.
K1-3
IB-581