Furuno DP-6 Operator's Manual

1 Creating Files

1. Press function key [F1] to display the
File menu.
File
1: New
2: Open
3: Close
4: Delete
5: Rename
6: Real Time Printing
7: File to Print
8: Cancel Printing
9: Clear Buffer
0: Floppy Disk Format
Figure 1 File menu
2. Press the [1] key.
3. Type your message.
Note: Do not use lower case letters, #, &, *, $
or % in telex messages. Also, do not put "$$$"
(three successive $s) in the middle of a Tx
message, but at the end. The communication
line is automatically disconnected when the
DP-6 detects this string.

2 Saving a File

1. Press function key [F1] to display the File
menu.
2. Press the [3] key. The screen should look
something like Figure 2.
DP-6
Operator's Guide
Close Text
Save file ?
( UNTITLED1 )
Figure 2 Close text screen
3. Press the [Enter] key. Enter file name, us-
ing up to eight characters.
You may use any alphabet or numeric on
the keyboard. But you may not use the fol-
lowing punctuation symbols;
| ! : " > < ;
4. Press the [Enter] key.
3 Registering Stations
1. Press function key [F5] followed by the
[1] key. The Station Entry screen appears.
Station Entry
Station List
Station Set Up
Station :
ID Code :
Mode : ARQ FEC
CH/Table : Channel ScanTable
Num/Table:
Figure 3 Station entry screen
1
Yes
No
Create
Change