Wiring Details - Shure DDS 5900 User Manual

Wiring Details

Connection to Main Power Supply
Blue
Brown
Green/Yellow
DCS-LAN Chain
The CCU uses Cat5e, Cat6 or Cat7 F/UTP or U/FTP cables with shielded RJ45 connectors.
EIA 568-B wiring must be used.
Important: The names of Cat5/6/7 cable type have changed.
Old Name
FTP
STP
UTP
Important: Use only F/UTP or U/FTP (screened) cables and screened RJ45 connectors and not U/UTP cable, which is unscreened.
How to wire a Cat5e (EIA 568-B) cable to a RJ45 con.:
Pin Function
1 In-going +
2 In-going -
3 +48V
4 0V
5 0V
6 +48V
7 Outgoing -
8 Outgoing +
If other color codes are used then the four pairs are connected as follows:
Pair 2: Pin 1 & 2
Pair 3: Pin 3 & 6
Pair 1: Pin 4 & 5
Pair 4: Pin 7 & 8
The phase of the pairs must be correct and the wiring specification EIA 568-B (Cat5e).
Cat6 and Cat7 cables are normally only terminated in sockets (female) and not in cable plugs.
Cat6 and Cat7 can only be used for feeding cables terminating in wall outlets or patch panels.
Neutral
Live
Earth (Ground)
New Name
F/UTP
U/FTP
U/UTP
Connector #1
ORG/WHT
ORG
GRN/WHT
BLU
BLU/WHT
GRN
BRN/WHT
BRN
Shure Incorporated
Connector #2
ORG/WHT
ORG
GRN/WHT
BLU
BLU/WHT
GRN
BRN/WHT
BRN
73/81