Audio Control - Shure DDS 5900 User Manual

Shure Incorporated
max_requests 250
mic_status_done
This command informs about seat number 12, which is active and has the name Sharon Hall attached.
Microphone Status Complete
mic_status_done
Provides notification that complete system status has been sent.
Seat State
seat_state
Provides seat state information.
This information is sent from the CCU to an External Control, when the state of a seat changes – a seat becomes passive or
active.
The seat number identification of a discussion unit. An integer ranging from 1 to 65535.
< seat state > The current state of the seat. This can be "active" or "passive"
Command error
command_error
The CCU has received an unknown command.
is a text explaining the error.
Examples:
command_error unknown command
command_error syntax error

Audio Control

Commands from External Control to DIS-CCU
Set Loudspeaker Volume
loudspeaker_volume
Sets the volume of the loudspeakers for all Discussion Units.
The volume of the loudspeakers ranges from -41 to 0. The value -41 indicates the speaker is Off. Values from -40 to 0 indicates
the attenuation in dB.
The CCU responds to this command by issuing the loudspeaker_volume command.
Set Line Input 1 Gain
line_input_gain_1
Adjusts the level of the line input 1 signal.
Adjust line input gain to 0 or 10 dB.
The CCU responds to this command by issuing the line_input_gain_1 command.
65/81