Gooseneck Microphones; Wiring Details - Shure DDS 5900 User Manual

Gooseneck Microphones

GM 59xx
Transducer type
Polar pattern
Frequency response
Sensitivity
Maximum input sound
level
Signal-to-noise ratio
Front/back ratio
Dimension (GM 5923)
Dimension (GM 5924)
Microphone connector
MX4xx
Transducer type
Polar pattern
Frequency response

Wiring Details

Main Power
Blue Neutral
Brown Live
Green/Yellow Earth (Ground)
DCS-LAN Chain
The DIS-CCU uses Cat5e, Cat6 or Cat7 F/UTP or U/FTP
cables with shielded RJ45 connectors.
EIA 568-B wiring must be used.
Important: The names of Cat5/6/7 cable type have
changed.
Old Name New Name
FTP F/UTP
STP U/FTP
UTP U/UTP
Condenser
Cardioid
30 Hz - 18 kHz
-52 +/- 3dB (0dB =
1V/1Pa, 1 kHz)
110 dB SPL, 1 kHz at
3% THD
>60 dBA
>25 dB (1 kHz)
400 mm (15.75 in.)
500 mm (19.7 in.)
XLR3 male
Condenser
Cardioid, Supercardioid
50 Hz - 18 kHz
Sensitivity
Maximum input sound
level
Signal-to-noise ratio
Dimension
Weight
Microphone connector
Important: Use only F/UTP or U/FTP (screened)
cables and screened RJ45 connectors and not U/UTP
cable, which is unscreened.
How to wire a Cat5e (EIA 568-B) cable to a RJ45 con.:
Pin Function Connector #1
1 In-going + ORG/WHT
2 In-going - ORG
3 +48V GRN/WHT
4 0V BLU
5 0V BLU/WHT
6 +48V GRN
7 Outgoing - BRN/WHT
8 Outgoing + BRN
If other color codes are used then the four pairs are
connected as follows:
80
Technical Specifications
Cardioid: −35 dBV/Pa
(18 mV)
Supercardioid: −34 dBV/
Pa (21 mV)
(0dB = 1V/1Pa, 1 kHz)
Cardioid: 121 dB
Supercardioid: 120 dB
1 kHz at 1% THD, 1 kΩ
load
Cardioid: 66 dB
Supercardioid: 68 dB
MX 405: 15 cm (6 in.)
MX 410: 25 cm (10 in.)
MX 415: 38 cm (15 in.)
MX405: 0.054 kg (0.119
lbs)
MX410: 0.068 kg (0.150
lbs)
MX415: 0.07 kg (0.154
lbs)
XLR3 male
Connector #2
ORG/WHT
ORG
GRN/WHT
BLU
BLU/WHT
GRN
BRN/WHT
BRN