Function Description; Block Diagram; Module Features; Functions - Pilz PSSu E F 2DO 2 Operating Manual

Function description

4 Function description
4.1

Block diagram

4.2

Module features

4.2.1

Functions

Module supply
}
The module supply provides the module with voltage.
Signals at the output
}
"0" signal (0 V) at the output:
–
–
} "1" signal (+24 V) at the output:
–
–
Periphery supply
}
The module routes the periphery supply from the module bus to the base module ter-
minals.
}
The periphery supply is used to supply the outputs.
Outputs
}
The head module sets the output status via the module bus.
}
The max. capacity at an output depends on the load (see characteristic). Connecting a
higher capacity may lead to an error.
}
Operation with electronic contactors has not been tested and may lead to errors.
Please contact our Customer Support team if you are using electronic contactors.
Output test
Operating Manual PSSu E F 2DO 2(-T)(-R)
21322-EN-07
14 24
Periphery
Supply
+ 24 V DC
Module
Supply
+ 5 V DC
Data
(FS)
(C-Rail)
13 23
Output is high impedance
No current to the load
Output is low impedance
Current is supplied to the load
0 V 0 V
11 12 21 22
13