Product Specifications; Technical Data; Before Starting The Equipment - F.F. Group CJS 20V/80 PLUS Original Instructions Manual

6 | English
Hazardous Decomposition: None during normal op-
erating conditions. If cell is ruptured hydrogen fluo-
ride and carbon monoxide may be released.

PRODUCT SPECIFICATIONS

INTENDED USE
The jigsaw is designed for sawing wood, metals,
non-ferrous metals and plastics using the appropri-
ate saw blade.
The equipment is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. Please note that our equipment has not
been designed for use in commercial, trade or in-
dustrial applications.

TECHNICAL DATA

Article number
Model
Jigsaw Capacities:
Motor power supply
Stroke speed
Stroke length
Cutting depth, wood
Cutting depth, plastic
Cutting depth, aluminium
Cutting steel
Miter cut (left & right)
Weight (jigsaw only)
Protection class
Sound emission values determined according to
EN 60745-1
Typically the A-weighted noise levels of the product are:
Sound pressure level
Sound power level
Uncertainty K
Wear hearing protection!
Vibration total values a
and uncertainty K determined according to EN
60745-1
Vibration Level
a
h
K
IDENTIFICATION
1. Locking button for On/Off switch
2. On/Off switch
3. Handle
4. 3mm hex. key
41318
CJS 20V/80 PLUS
V DC 20
min 0 - 2.400
-1
mm 25
mm 80
mm 12
mm 25
mm 10
deg <45°
kg 1,7
/ II
dB(A) 79,4
dB(A) 90,4
dB 3
(triax vector sum)
h
m/s 11,18
2
m/s 1,5
2
5. Adapter for dust extraction system
6. Dial scale for soleplate
7. Bevel Locking Bolt
8. Adjustable soleplate
9. Guide roller
10. Saw blade
11. Parallel stop
12. Locking screws for parallel stop
13. Blade holder
14. Safety guard
15. Selector switch for pendulum action
16. Splinter guard
17. Line mark
18. Clamp plate
19. LED lamp
UNPACKING & CHECKING
PACKAGING
Carefully remove the product from the packaging
and examine it for any sign of damage that may
have happened during shipping. If any part is dam-
aged or missing; please contact please contact the
Customer Service Department and do not attempt
to use the saw. The packaging material should be
retained at least during the guarantee period: in
case the machine needs to be returned for repair.
WARNING: Some of the packaging materials used
may be harmful to children. Do not leave any of
these materials in the reach of children.
If any of the packaging is to be thrown away, make
sure they are disposed of correctly; according to lo-
cal regulations.
BARE MACHINE
This reciprocating saw is supplied without a battery,
and without a charger.

BEFORE STARTING THE EQUIPMENT

SAFETY GUARD
The safety guard (14) protects the user from acciden-
f
tally touching the saw blade (10) but still gives you an
unobstructed view of the cutting area.
The safety guard (14) must always be fitted and in po-
f
sition before starting any sawing work.
The safety guard (14) can be pulled up as shown in
f
Image C.
CHANGING THE SAW BLADE (image B)
IMPORTANT: Remove the battery pack before you
fit or replace a saw blade.
WARNING: THE TEETH OF THE SAW BLADE ARE
VERY SHARP!
You can fit or replace saw blades without using any
other tools.
1. Set the selector switch for pendulum action (15)
to position a.
2. Remove the safety guard (14).
3. Press the blade holder (13) and insert the saw
blade (10) into the blade holder (13) as far as
the stop (Image B). The teeth on the saw blade
must be pointing forwards.
4. Allow the blade holder (13) to slide back to start-
ing position. The saw blade (10) must sit in the