Table of Contents
Advertisement
Available languages
Available languages
8
| English
PRODUCT SPECIFICATIONS
INTENDED USE
The jigsaw is designed for sawing wood, metals,
non-ferrous metals and plastics using the appro-
priate saw blade. The equipment is to be used
only for its prescribed purpose. Any other use is
deemed to be a case of misuse. Please note that
our equipment has not been designed for use in
commercial, trade or industrial applications.
TECHNICAL DATA
Article number
Model
Jigsaw Capacities:
Motor power supply
Stroke speed
Stroke length
Cutting depth, wood
Cutting depth, plastic
Cutting depth, aluminium
Cutting steel
Miter cut (left & right)
Weight (jigsaw only)
Protection class
Sound emission values determined according
to EN 60745-1
Typically the A-weighted noise levels of the product
are:
Sound pressure level
Sound power level
Uncertainty K
Wear hearing protection!
Vibration total values a
and uncertainty K determined according to
EN 60745-1
Vibration Level
a
h
K
IDENTIFICATION
1. Locking button for On/Off switch
2. On/Off switch
3. Handle
4. 3mm hex. key
5. Adapter for dust extraction system
6. Dial scale for soleplate
7. Bevel Locking Bolt
41 318
CJS 20V/80 PLUS
V DC
20
min
0 - 2.400
-1
mm
25
mm
80
mm
12
mm
25
mm
10
deg
<45°
kg
1,7
/ II
dB(A)
79,4
dB(A)
90,4
dB
3
(triax vector sum)
h
m/s
11,18
2
m/s
1,5
2
8. Adjustable soleplate
9. Guide roller
10. Saw blade
11. Parallel stop
12. Locking screws for parallel stop
13. Blade holder
14. Safety guard
15. Selector switch for pendulum action
16. Splinter guard
17. Line mark
18. Clamp plate
19. LED lamp
UNPACKING & CHECKING
PACKAGING
Carefully remove the product from the packag-
ing and examine it for any sign of damage that
may have happened during shipping. If any part
is damaged or missing; please contact please
contact the Customer Service Department and
do not attempt to use the saw. The packaging
material should be retained at least during the
guarantee period: in case the machine needs to
be returned for repair.
WARNING: Some of the packaging materials
used may be harmful to children. Do not leave any
of these materials in the reach of children.
If any of the packaging is to be thrown away,
make sure they are disposed of correctly; accord-
ing to local regulations.
BARE MACHINE
This reciprocating saw is supplied without a bat-
tery, and without a charger.
BEFORE STARTING THE EQUIPMENT
SAFETY GUARD
The safety guard (14) protects the user from acci-
f
dentally touching the saw blade (10) but still gives
you an unobstructed view of the cutting area.
The safety guard (14) must always be fitted and in
f
position before starting any sawing work.
The safety guard (14) can be pulled up as shown in
f
Image C.
CHANGING THE SAW BLADE (image B)
IMPORTANT: Remove the battery pack before
you fit or replace a saw blade.
WARNING: THE TEETH OF THE SAW BLADE
ARE VERY SHARP!
You can fit or replace saw blades without using
any other tools.
1. Set the selector switch for pendulum action
(15) to position a.
2. Remove the safety guard (14).
3. Press the blade holder (13) and insert the saw
blade (10) into the blade holder (13) as far as
the stop (Image B). The teeth on the saw blade
must be pointing forwards.
4. Allow the blade holder (13) to slide back to
starting position. The saw blade (10) must sit
in the guide roller (9).
5. Check that the saw blade (10) is securely
CJS 20V/80 PLUS
Advertisement
Table of Contents
