Changing Gutta-Percha - Eighteeth Fast-Fill User Manual

1 do tekstu, który ma się tutaj pojawić.
tosować 标题 1 do tekstu, który ma się tutaj pojawić.
NOTE
If there is a little residual Gutta-percha in handpiece or cartridge, tighten the
cartridge again to prevent leak Gutta-percha after heating.
If there is too much residual Gutta-percha in handpiece or cartridge, please refer
to daily cleaning process.
Please use good mobility Gutta-percha, otherwise the Gutta-percha will leak. If
leaking please refer to daily cleaning process.

7.3 Changing Gutta-percha

Błąd! Użyj karty Narzędzia główne, aby zastosować 标题
Błąd! Użyj karty Narzędzia główne, aby zas
1
Heating
temperature is reached, heating process will
switch off and "
2
Direction of pushing
3
Real time heating temperature
4
Gutta-percha residual
After heating completed, hold down press
to push out Gutta-percha. At the same time,
1
the light of direction flashes,
residual
according. Press
standby interface.
During standby state, holding down press
in 2 seconds to entry memory
parameter setting. Press
GP". Press
confirm.
indication, When
"will display on screen.
Gutta-percha bar
to exit and return to
till "Yes" and press
the set
2
the
will change
till "Change
to
Page
19 / 37