OPERATION
CAUTION:
footwear, and leather gloves to protect from burrs and sharp edges.
When handling large heavy materials make sure they are properly supported.
This notcher uses replaceable hole-saws to produce quality notches in various materials at
almost unlimited angles.
1. Before notching can take place, the correct hole-saw must be selected to match the material
being notched.
Note: Only heavy duty hole saws can be used. The hole-saws with solid backing
plates are best. The stamped and formed hole-saws are not rigid enough for this machine. The
hole-saws simply screw onto the arbor.
2. Loosen the vise lock lever and rotate to the desired notch angle and re-tighten.
3. Select the material and insert it into the vise.
Leave the minimum required material hanging
beyond the vise.
Always wear proper eye protection with side shields, safety
14
14