Table of Contents
Advertisement
• Improper connection of the equipment-grounding conductor can result in risk of electric
shock. The conductor with insulation having an outer surface that is green with or without
yellow stripes is the equipment-grounding conductor. If repair or replacement of the electric
cord or plug is necessary, do not connect the equipment-grounding conductor to a live
terminal.
• Check with a qualified electrician or service personnel if the grounding instructions are not
completely understood, or if in doubt as to whether the tool is properly grounded.
• Repair or replace damaged or worn cord immediately.
Extension Cord Safety
Extension cord should be in good condition and meet the minimum wire gauge requirements
listed below:
AMP RATING
0-6
7-10
11-12
13-16
17-20
21-30
An undersized cord decreases line voltage, causing loss of power and overheating. All cords
should use a ground wire and plug pin. Replace any damaged cords immediately.
LENGTH
25ft
50ft
16
16
16
16
16
16
14
12
12
12
10
10
WIRE GAUGE
13
13
100ft
16
14
14
12
10
No
Advertisement
Table of Contents
