Arbor Adapters - Baileigh Industrial TN-300 Operator's Manual

4. Start the notcher with the on/off switch.
5. Grasp the feed hand wheel and SLOWLY feed
the hole-saw into the tubing. Continue feeding
completely through the material to complete the
notch.
6. The speed of the hole-saw is fixed and is correct
for most sizes.
7. If you encounter chatter, feed slower and make
sure the "V" rollers have enough tension on them.
The feed hand wheel should have a slight
resistance set by the "V" rollers; if the rollers
should loosen up they will need to be adjusted to give them some resistance.

Arbor Adapters

When setting up the notcher, use the correct arbor to saw adapter to fit the size and
manufacturer of the hole saw being used.
Contact the Baileigh Industrial to order optional or replacement adapters.
Standard Adapter.
Used with most hole
saws.
Reducer Adapter.
Used with small hole
saws.
Optional Adapter.
Larger M18 end to fit
certain hole saws
manufacturer saws.
15
15
Hole Saw End
Arbor End