Category Button; Text Character Input - Casio CT-X9000IN User Manual

4 CATEGORY Button

The many tones of the Digital Keyboard are divided into 20
categories to help make it possible for you to find a particular
tone quickly and easily. You can use the 4 CATEGORY
button to select the last tone you selected in a category.
Under initial default settings, pressing 4 CATEGORY will
select the first tone in a category.
• The example below shows how to select a tone using
4 CATEGORY. Rhythms, songs, and music presets are
also divided into categories, and you can also use the
4 CATEGORY button to scroll between them.
To switch between tone categories
1.
Press 5 TONE.
This displays (tone indicator). You can select a tone
while the tone indicator is displayed.
2.
Press 4 CATEGORY.
This displays the letter "C", followed by the currently
selected category number and name for a few seconds.
Category number
P i a n o
• After a few seconds, the tone number and tone name
will appear, and
tones only within the current category while
flashing. (See step 4.)
3.
While "C" is displayed, press 4 CATEGORY
to advance to the next category.
This displays the next category number and name.
• The category tone that was last selected when exited a
category (the first category tone under initial default
settings) will be selected first when you re-enter it.
• You can also use bn [–] (back) and [+] (forward) in
place of 4 CATEGORY to scroll between categories.
• Pressing bn [–] and [+] at the same time will jump to
Category 1, and select the tone that was selected the
last time you exited Category 1.
4.
To select tones only within the currently
displayed category, wait until
flash, or press bk FUNCTION to make
flash.
• While is flashing, use bn [–] or [+], or the bl dial to
scroll through the tones of currently selected category.
• To select a tone in another category, press 5 TONE.
This causes to stop flashing.
Category name
will start to flash. You can select
starts to
To navigate between categories
1.
Press 5 TONE.
2.
While a tone name is displayed, hold down
4 CATEGORY as you press bn [–] or [+].
[–] jumps to the first tone in the category before the one
where the displayed tone is located, while [+] jumps to
the first tone in the next category.

Text Character Input

Use the procedures below to input user data names and other
text.
To insert characters
1.
Use the [1] (V) and [3] (W) bm number keys
to move the cursor to the position where you
want to insert a character.
2.
Press the [8] (INSERT) bm number key.
• This inserts "A" at the cursor position.
is
Operations Common to All Modes
Cursor (flashing)
N o N a m e
EN-15