Casio CT-X9000IN User Manual page 134

Module Name
Display Parameter Data

Reflection
WetLevel Wet Level
Feedback Feedback
Tone Tone
In Level Input Level
DryLevel Dry Level

Delay
Time Delay Time
TmRatioL Delay Ratio L
TmRatioR Delay Ratio R
Level L Delay Level L
Level R Delay Level R
FdbkType Feedback Type
Fdbk Lvl Feedback
Hi Damp High Damp
TmpoSync Delay Tempo
Sync
In Level Input Level
DryLevel Dry Level
WetLevel Wet Level

Piano Effect
Lid Type Lid Type
RefLevel Reflection Level
In Level Input Level
WetLevel Wet Level
DryLevel Dry Level

LFO Wah
In Level Input Level
Resonanc Resonance
Manual Manual
Rate LFO Rate
Depth LFO Depth
Waveform LFO Waveform
WetLevel Wet Level
DryLevel Dry Level
Simulates the initial reflection of reverberation. Applies acoustic presence to notes.
Adjusts the level of the effect sound.
Adjusts the repeat of the reflected sound.
Adjusts the tone of the reflected sound.
Adjusts the input level.
Adjusts the level of the direct sound.
Delays the input signal and feeds it back to create a repeating effect.
Adjusts the total delay time in 1 ms units.
Adjusts the ratio of the left channel relative to the total delay time. 000 to 127
Adjusts the ratio of the right channel relative to the total delay
time.
Adjusts the level of the left channel.
Adjusts the level of the right channel.
Selects the feedback type.
Stereo: Stereo feedback
Cross: Cross feedback
Adjusts the feedback amount.
Adjusts the high-range damp. A smaller number increases
damping.
Specifies how the actual total delay time is synced with tempo.
Off: Uses Delay Time value.
1/4 to 1: Uses value in accordance with number of beats.
Adjusts the input level.
Adjusts the level of the direct sound.
Adjusts the level of the effect sound.
This effect is suited to acoustic piano play.
Adjusts how sound resonates in accordance with the opening
state of a piano lid.
Adjusts the level of the initial reflection.
Adjusts the input level.
Adjusts the level of the effect sound.
Adjusts the level of the direct sound.
This is a "wah" effect that can automatically affect the frequency using an LFO.
Adjusts the input level. The input signal can become distorted
when the level of the sound being input, the number of chords, or
the Resonance value is large. Adjust this parameter to eliminate
such distortion.
Adjusts the strength of feedback
Adjusts the wah filter reference frequency.
Adjusts the LFO rate.
Adjusts the LFO depth.
Selects the LFO waveform.
Adjusts the level of the effect sound.
Adjusts the level of the direct sound.
Description
Reference
Settings
000 to 127
000 to 127
000 to 127
000 to 127
000 to 127
0001 to 1099
000 to 127
000 to 127
000 to 127
Stereo, Cross
000 to 127
000 to 127
Off, 1/4, 1/3, 3/8, 1/2,
2/3, 3/4, 1
000 to 127
000 to 127
000 to 127
Closed, SemiOpen,
FullOpen
000 to 127
000 to 127
000 to 127
000 to 127
000 to 127
000 to 127
000 to 127
000 to 127
000 to 127
Sine, Triangle,
Random
000 to 127
000 to 127
EN-133