Using Recommended Tones And Tempos (One-Touch Presets; Adding Harmony To Melody Notes (Auto Harmonize - Casio CT-X9000IN User Manual

Using Recommended Tones and
Tempos (One-Touch Presets)
One-Touch Preset gives you one-touch access to tone and
tempo settings that go well with the currently selected Auto
Accompaniment rhythm pattern.
1.
Hold down 6 RHYTHM until the tone name is
displayed.
This automatically applies the One-Touch Preset settings
in accordance with the rhythm pattern that is currently
selected.
2.
Play a chord on the keyboard.
This immediately starts Auto Accompaniment.
Adding Harmony to Melody Notes
(Auto Harmonize)
Auto Harmonize lets you add harmony to melody notes you
play with your right hand for more melodic depth. You can
select any one of 12 Auto Harmonize types.
• A single button is used to control auto harmonize and the
arpeggiator (page EN-27). Because of this, the arpeggiator
cannot be used while auto harmonize is in use.
To turn on Auto Harmonize
1.
Press do AUTO HARMONIZE/
ARPEGGIATOR and confirm that the [AUTO
HARMONIZE] indicator is displayed.
• Fingering a chord on the accompaniment keyboard as
you play the melody on the UPPER part keyboard will
add chords to your melody play.
2.
To turn Auto Harmonize off, press do AUTO
HARMONIZE/ARPEGGIATOR.
This causes the [AUTO HARMONIZE] indicator to
disappear.
• If the [ARPEGGIATOR] indicator is displayed instead of
the [AUTO HARMONIZE] indicator in step 1 of the
above procedure, you will need to change the function
assigned to the button.
Perform the procedure under "To configure function
settings with the bk FUNCTION button" (page EN-107)
and select "1 A.Har." for the following setting: Auto
Harmonize/Arpeggiator (AHar/Arp) 3 AUTO
HARMONIZE/ARPEGGIATOR button assignment
(BtnAsign) (page EN-109).
Displayed
Using Auto Accompaniment (Rhythm Mode)
To select the Auto Harmonize type
1.
Perform the procedure under "To turn on Auto
Harmonize" and confirm that the [AUTO
HARMONIZE] indicator is displayed.
2.
Long-press do AUTO HARMONIZE/
ARPEGGIATOR until the [FUNCTION] indicator
flashes on the display.
This displays the currently selected auto harmonize
number and name.
3.
Use bn [–] and [+] or the bl dial to specify the
auto harmonize type.
• For details about types, see "Auto Harmonize Type
List" (page EN-51).
4.
When the setting is the way you want, long-
press the [4] (EXIT) bm number key to exit the
setting screen.
■ Auto Harmonize Type List
Type
Type Name
number
01 Duet 1
02 Duet 2
03 Country
04 Octave
05 5th
06 3-Way Open
07 3-Way Close
08 Strings
09 4-Way Open
10 4-Way Close
11 Block
12 Big Band
Description
Adds close (separated by 2 to 4
degrees) 1-note harmony below
the melody note.
Adds open (separated by more
than 4 to 6 degrees) 1-note
harmony below the melody note.
Adds country style harmony.
Adds the note from the next lower
octave.
Adds the fifth degree note.
Adds 2-note open harmony, for a
total of three notes.
Adds 2-note close harmony, for a
total of three notes.
Adds harmony that is optimal for
strings.
Adds 3-note open harmony, for a
total of four notes.
Adds 3-note close harmony, for a
total of four notes.
Adds block chord notes.
Adds big band style harmony.
EN-51