General Guide
Timeout
If you do not perform any operation for a while configuring
settings, the display will return to the previous screen
automatically.
Using the 10-key Pad (9)
Use the number buttons and the [–] and [+] keys to change
displayed numbers and settings.
Number Buttons
Use the number buttons to enter numbers and values.
• Enter the same number of digits as the currently displayed
value.
Example: To enter tone number 004, input 0 3 0 3 4.
Using the FUNCTION Button (bm)
Use this button to change the volume level and pitch, and to configure other settings.
1.
Press bm FUNCTION.
2.
Next, press bm FUNCTION the number of times required to select the setting you want to change.
Each press of bm FUNCTION cycles through the available parameters.
• You can also scroll back through settings by holding down bm FUNCTION and pressing bn TEMPOw.
bm key
Parameter
presses
1
Transpose
2
Accompaniment
Volume
3
Song Volume
4
Dance Music
Volume
EN-4
Display
Trans.
Changes (transposes) overall instrument tuning by semitone units.
–12 to +12 (semitone units, one octave up/down)
AcompVol
Changes the Auto Accompaniment volume.
Song Vol
Changes the song playback volume.
DM Vol.
Changes the dance music song playback volume.
• Negative values cannot be input using the number buttons.
Use [+] (increase) and [–] (decrease) instead.
[–] and [+] Keys
You can use the [+] (increase) and [–] (decrease) keys to
change the displayed number or value.
• Holding down either key scrolls the displayed setting.
• Pressing both keys at the same time will revert to the initial
default setting or the recommended setting.
Description