Outputting Keyboard Notes To Audio Equipment - Casio CT-X9000IN User Manual

Connecting to Audio Equipment
Outputting Keyboard Notes to
Audio Equipment
You can connect audio equipment or a music amplifier to the
Digital Keyboard and then play through external speakers for
more powerful volume and better sound quality.
• Turn off the external device when making connections.
After connecting, turn down the Digital Keyboard and
external device volume levels whenever turning power
on or off.
• After connecting, turn on the Digital Keyboard and then
the external device.
• If keyboard notes sound distorted when they are
sounded from external audio equipment, lower the
Digital Keyboard's volume setting.
To connect an external device to the Digital
Keyboard's PHONES jack
Connection requires commercially available connecting cords,
supplied by you.
• The connecting cords should have a stereo standard plug
on one end and a plug that matches the configuration of the
external device on the other end.
fk PHONES jack (Stereo standard jack (6.3mm))
Stereo standard plug
EN-12
Audio equipment, amplifier,
etc.
CT-X9000IN: To connect an external device to
the Digital Keyboard's LINE OUT jacks
Connection requires commercially available connecting cords,
supplied by you.
Audio amplifier AUX IN jacks, etc.
Pin plugs
RIGHT (Red)
LEFT (White)
Standard plug (6.3mm)
■ Connecting to Audio Equipment (Figure
Use commercially available cables to connect the external
audio equipment to the Digital Keyboard's LINE OUT jacks as

shown in Figure . LINE OUT R jack output is right channel
sound, while LINE OUT L/MONO jack output is left channel
sound. It is up to you to purchase connecting cables like the
ones shown in the illustration for connection of audio
equipment. Normally in this configuration you must set the
audio equipment's input selector to the setting that specifies
the terminal (such as AUX IN) to which the Digital Keyboard is
connected.
■ Connecting to a Musical Instrument Amplifier

(Figure )
Use commercially available cables to connect the amplifier to
the Digital Keyboard's LINE OUT jacks as shown in Figure

. LINE OUT R jack output is right channel sound, while
LINE OUT L/MONO jack output is left channel sound.
Connecting to the LINE OUT L/MONO jack only outputs a
mixture of both channels. It is up to you to purchase a
connecting cable like the one shown in the illustration for
connection of the amplifier.
et LINE OUT jacks
(Standard jack (6.3mm))
Guitar amplifier
Keyboard amplifier, etc.
INPUT 1
INPUT 2

)