Looping Playback Of Specific Song Measures (A-B Repeat; Playing Back With One Hand's Part Muted - Casio CT-X9000IN User Manual

To select a tone for keyboard play in the
Song Bank mode
1.
In the Song Bank mode, press 5 TONE.
This displays (tone indicator).
indicator) will also remain on the display.
2.
Use the bm number keys, bn [–] and [+], or the
bl dial to select the number of the tone you
want to assign to keyboard play.
• While is displayed, you can perform the split and/or
layer tone selection operation. For more information,
see "Selecting a Tone" (page EN-18).
• To change a tone number you selected using the procedure
above, press 7 SONG BANK. This causes
disappear, leaving only
To adjust the balance between song and
keyboard volume
Perform the procedure under "To configure function settings
with the bk FUNCTION button" (page EN-107) and configure
the following setting: Song Volume (Song Vol) (page EN-110).
Looping Playback of Specific
Song Measures (A-B Repeat)
To loop a range of measures in a song, you need to specify
the start measure and end measure of the section you want to
repeat.
Start
These measures are repeated.
To loop a specific phrase
1.
If there is no indicator mark next to [REPEAT],
press bp REPEAT to display it.
2.
Perform steps 1, 2, and 3 under "To select a
single built-in song for playback" (page EN-38)
to start song playback.
Playing a Built-in Song or a Song on a USB Flash Drive (Song Bank Mode)
(song bank
to
displayed.
End
3.
When playback reaches the beginning of the
section you want to loop, press bq A-B.
This will make the beginning of the measure that is
playing when you press bq A-B the beginning of the
loop, and cause the indicator mark next to [A-B] to start
to flash.
4.
When playback reaches the end of the section
you want to repeat, press bq A-B again.
This will make the end of the measure that is playing
when you press bq A-B the end of the loop, and cause
the indicator mark next to [A-B] to stop flashing.
5.
To return to normal playback, press bq A-B.
This causes the indicator mark next to [A-B] to disappear.
Playing Back with One Hand's
Part Muted
You can mute one of the hand parts of a song for playback.
Then you can practice by playing the muted part on the
keyboard. The following types of songs can be used for such
practice: built-in songs,* or CMF format (one type of CASIO
MIDI file) songs* stored on a USB flash drive.
* These songs have part channel information (page EN-40).
To play back with one hand's part muted
1.
Press 7 SONG BANK.
2.
Use the bm number keys, bn [–] and [+], or the
bl dial to select a song number.
3.
Press ck PLAY/STOP to start song playback.
Flashing
Displayed
EN-39