Casio CT-X9000IN User Manual page 118

To load data from a USB flash drive to Digital
Keyboard memory
1.
Perform steps 1, 2, and 3 under "To save
Digital Keyboard data to a USB flash drive"
(page EN-116).
2.
Use the [1] (V) and [3] (W) bm number keys
to display "Load", and then press [6] (ENTER).
3.
Use the [1] (V) and [3] (W) keys to display a
sub-menu of options that correspond to the
type of data being imported.
• See "Sub Menu/File Name Extension List" (page
EN-116).
4.
Press [6] (ENTER).
This displays a file name of data that can be imported.
5.
Use bn [–] and [+] or the bl dial to select the
data you want to import into Digital Keyboard
memory.
• If "All Data" is selected in step 3, steps 6 and 7 below
are not required. Proceed to step 8.
• Pressing bk FUNCTION at this time will display the
file name extension of the currently selected data file.
(Note that this operation is possible only if the
[FUNCTION] indicator is flashing.) Press
bk FUNCTION again to return to the file name.
6.
Press [6] (ENTER).
7.
Use bn [–] and [+] or the bl dial to specify the
number of the user area where imported data
should be stored.
• Pressing bn [–] and [+] at the same time displays the
lowest numbered empty user area. If there is no empty
user area, the lowest numbered area is displayed.
8.
Press [6] (ENTER).
This displays "Sure?"
• If you displayed "All Data" in step 3 of this procedure or
if the user area you specified in step 7 already
contains data, the message "Replace?" will appear. If
this happens, pressing bn [+] (YES) in step 9 below
will overwrite the existing data in the user area with the
imported data.
9.
Press bn [+] (YES) to import.
• To cancel the operation, press bn [–] (NO).
• Pressing bn [+] (YES) displays "Wait..." (operation in
progress). Do not perform any operation while this
message is displayed. "Complete" is displayed after
the operation is complete.
10.
To exit the operation, long-press the [4] (EXIT)
bm number key.
To delete USB flash drive data
1.
Perform steps 1, 2, and 3 under "To save
Digital Keyboard data to a USB flash drive"
(page EN-116).
2.
Use the [1] (V) and [3] (W) bm number keys
to display "Delete", and then press [6]
(ENTER).
3.
Use the [1] (V) and [3] (W) keys to display a
sub-menu of options that correspond to the
type of data being deleted.
• See "Sub Menu/File Name Extension List" (page
EN-116).
4.
Press [6] (ENTER).
5.
Use bn [–] and [+] or the bl dial to select the
data to be deleted, and then press [6] (ENTER).
This displays "Sure?"
6.
To delete the data, press bn [+] (YES).
• To cancel the operation, press bn [–] (NO).
• Pressing bn [+] (YES) displays "Wait..." (operation in
progress). Do not perform any operation while this
message is displayed. "Complete" is displayed after
the operation is complete.
7.
To exit the operation, long-press the [4] (EXIT)
bm number key.
USB Flash Drive
EN-117