Using Music Presets - Casio CT-X9000IN User Manual

Using Music Presets

Music Presets are a collection of setups with chord
progression data. With the touch of a button you can recall
one of 310 presets that include tone, rhythm, and other setting
data, along with Auto Accompaniment chord progressions, all
of which are combined to match specific musical genres and
melodies.
For details about music preset categories and types, refer to
the separate "Appendix".
To perform using a music preset
1.
Press 6 RHYTHM.
2.
Long-press cm ACCOMP until the [ACCOMP]
indicator starts to flash.
Music preset number
S o f t P o
• The flashing [ACCOMP] indicator indicates that the
Digital Keyboard is in the Music Preset Mode.
3.
Use the bm number keys, bn [–] and [+], or the
bl dial to select a music preset number.
This changes the displayed music preset name. At the
same time, settings are recalled for the tone, rhythm,
chord progression, and data that matches the genre or
melody indicated by the name.
• See "Numeric Input" (page EN-14) for information
about how to specify a number.
• Music presets are divided into nine categories. You
can easily find the music preset you want by going to
the dance category, classic category, etc. For more
information, see "4 CATEGORY Button" (page
EN-15).
4.
Press ck START/STOP or bo INTRO.
This starts Auto Accompaniment play in accordance with
the preset chord progression.
5.
Play along on the keyboard with the Auto
Accompaniment.
6.
To stop Auto Accompaniment, press
ck START/STOP or bt ENDING/SYNCHRO
START.
7.
To exit the Music Preset Mode, press
cm ACCOMP.
• At this time the tone and rhythm settings configured by
the Music Preset Mode remain in effect.
EN-52
Music preset name
p
• With some music presets, selecting a number in step 3
causes the [SYNC START] indicator to start to flash,
indicating that the Digital Keyboard is in synchro start
standby (page EN-47). If this happens, Auto
Accompaniment can be started by playing something on
the keyboard instead of pressing ck START/STOP. For
information about operations that can be performed while in
synchro start standby, see step 1 under "To use Synchro
Start to start Auto Accompaniment play" (page EN-47).
• The accompaniment pattern operations (page EN-46) can
be used during a performance with a music preset.
• The operations below cannot be used during play that
employs a music preset.
– Rhythm setting change (page EN-42)
– Synchro stop (page EN-47)
– One-Touch Preset (page EN-51)
– Registration (page EN-65)
To change the key of a chord progression
Perform the procedure under "To configure function settings
with the bk FUNCTION button" (page EN-107) and configure
the following setting: Other (Other) 3 Music preset key
change (MP Key) (page EN-112).
Settings Changed by Music Preset
Each selection of a music preset automatically changes the
Digital Keyboard settings below. Changed settings are
maintained even after the Music Preset Mode is exited.
• Tempo
• Layer (on/off)
• Split (on/off)
• do AUTO HARMONIZE/ARPEGGIATOR button
assignment
• Auto Harmonize (on/off, type)
• Arpeggiator (on/off, type)
• Arpeggiator Hold (on/off)
• Tone number (UPPER 1, LOWER 1, UPPER 2, LOWER 2
parts)
• Octave Shift (UPPER 1, LOWER 1, UPPER 2, LOWER 2
parts)
• Reverb, Chorus, Delay (on/off, type)