WK200_02_e.fm 6 ページ 2008年5月19日 月曜日 午後7時14分
General Guide
Using the 10-key Pad (
Use the number buttons and the [–] and [+] buttons to change
the settings of the parameters that appear in the upper left
area of the display.
Setting
S t . G r P n o
Number Buttons
Use the number buttons to enter numbers and values.
• Enter the same number of digits as the currently displayed
value.
Example: To enter tone number 001, input 0 3 0 3 1.
• Negative values cannot be input using the number buttons.
Use [–] (decrease) and [+] (increase) instead.
[–] and [+] Buttons
You can use the [–] (decrease) and [+] (increase) buttons to
change the displayed number or value.
• Holding down either button scrolls the displayed setting.
• Pressing both buttons at the same time will revert to the
initial default setting or the recommended setting.
E-6
)
FUNCTION Button (
bs
You can use the FUNCTION button (
effect, to delete data, and to perform a wide range of other
Digital Keyboard operations.
To select a function
1.
Press
2.
Use the
to display the function you want.
3.
Refer to the indicated pages for details about
each function.
ct
ct
to display the function menu.
bs
(10-key) [4] (
• You can exit the function menu by pressing
• After selecting functions 8 through 12, press the
(10-key) [7] (ENTER) key to display the menu item's
submenu. Then use [4] (
) and [6] (
item. You can exit a submenu by pressing the
(10-key) [9] (EXIT) key.
) Functions
ct
) to adjust the reverb
) and [6] (
) keys
ct
.
bs
) to select an
bs