Changing Keyboard Response To Touch Pressure (Touch Response - Casio CT-X9000IN User Manual

Playing on the Keyboard
2.
To turn the arpeggiator off, press do AUTO
HARMONIZE/ARPEGGIATOR.
This causes the [ARPEGGIATOR] indicator to disappear.
• If the [AUTO HARMONIZE] indicator is displayed
instead of the [ARPEGGIATOR] in step 1 of the above
procedure, you will need to change the function
assigned to the button.
Perform the procedure under "To configure function
settings with the bk FUNCTION button" (page EN-107)
and select "2 Arpeg." for the following setting: Auto
Harmonize/Arpeggiator (AHar/Arp) 3 AUTO
HARMONIZE/ARPEGGIATOR button assignment
(BtnAsign) (page EN-109).
• Use the following procedure when you want an arpeggio
pattern to keep playing after you release the keyboard
keys.
Perform the procedure under "To configure function
settings with the bk FUNCTION button" (page EN-107)
and enable the following setting: Auto Harmonize/
Arpeggiator (AHar/Arp) 3 Arpeggiator Hold (ArpegHld)
(page EN-109).
• While you are using split (page EN-19), you can use the
UPPER 1 part or LOWER 1 part to sound the arpeggiator.
Perform the procedure under "To configure function
settings with the bk FUNCTION button" (page EN-107)
and change the following setting: Auto Harmonize/
Arpeggiator (AHar/Arp) 3 Arpeggiator Part (ArpegPart)
(page EN-109).
To select an arpeggiator type
1.
Perform the procedure under "To turn on the
arpeggiator" and confirm that the
[ARPEGGIATOR] indicator is displayed.
2.
Long-press do AUTO HARMONIZE/
ARPEGGIATOR until the [FUNCTION] indicator
flashes on the display.
This displays the currently selected arpeggiator type
number and name.
3.
Use bn [–] and [+] or the bl dial to display the
arpeggiator type you want to select.
• While the arpeggiator type is displayed, long-pressing
do AUTO HARMONIZE/ARPEGGIATOR will select
the tone that is recommended for the displayed type.
• For details about arpeggiator types, refer to the
separate "Appendix".
4.
When the setting is the way you want, long-
press the [4] (EXIT) bm number key to exit the
setting screen.
EN-28
Changing Keyboard Response to
Touch Pressure
(Touch Response)
Touch Response alters tone volume in accordance with
keyboard pressure (speed). This provides you some of the
same expressivity you get on an acoustic piano.
To enable and disable Touch Response
1.
Press dn TOUCH ON/OFF.
Each press toggles the indicator mark next to [TOUCH]
to appear and disappear.
• The indicator mark next to [TOUCH] disappears when
Touch Response is turned off. The indicator mark is
displayed while Touch Response is some setting other
than off.
• For information about the Touch Response setting,
see "To change Touch Response sensitivity" below.
To change Touch Response sensitivity
1.
Long-press dn TOUCH ON/OFF until the
[FUNCTION] indicator appears.
This displays the current Touch Response setting value.
2.
Use bn [–] and [+] or the bl dial to change the
setting value.
• The table below shows setting values and their
corresponding Touch Response sensitivity.
Setting Sensitivity
Value (Display)
01 Off (Off)
02 Light (Light)
03 Normal
(Normal)
04 Heavy
(Heavy)
• There is an indicator mark next to [TOUCH] while the
touch setting is something other than off.
3.
When the setting is the way you want, long-
press the [4] (EXIT) bm number key to exit the
setting screen.
Displayed/Not displayed
Description
Touch Response is turned off.
Sound volume is fixed,
regardless of key press speed.
Strong sound, even with light
pressure
Normal Touch Response
Normal sound, even with strong
pressure