Controlling Sounds; Using A Pedal - Casio CT-X9000IN User Manual

Controlling Sounds

Using a Pedal

Connecting a pedal lets you perform pedal operations that
add various effects during your performances. You can use a
pedal to start and stop Auto Accompaniment and Song Bank
(page EN-38) song play.
• A pedal unit does not come with the Digital Keyboard.
Purchase one separately from your retailer. See page EN-3
for information about options.
• You can also use a pedal to switch the Digital Keyboard
registration setup. For details, see "Using a Pedal to Cycle
Through Multiple Setups (Registration Sequence)" (page
EN-68).
Connecting a Pedal
Depending on the type of operation you want the pedal to
perform, connect the pedal's cable either to the Digital
Keyboard's fo PEDAL1 jack or fp PEDAL2/
EXPRESSION jack.
• You can connect a CASIO sustain pedal ("Separately
Available Accessories", page EN-3) to the fo PEDAL1
jack. The fp PEDAL2/EXPRESSION jack can be used to
connect a CASIO sustain pedal or a commercially available
expression pedal.
• If you use the fp PEDAL2/EXPRESSION jack to
connect a commercially available expression pedal,
you will need to specify the polarity type of the pedal
and also calibrate the pedal before you use it.
To do this, perform the procedure under "To connect a
pedal to the fp PEDAL2/EXPRESSION jack" (page
EN-30).
To connect a pedal to the fo PEDAL1 jack
1.
2.
3.
4.
5.
6.
Pedal jacks
7.
* See "Sounding Multiple Tones (Layer and Split)" (page
EN-19).
Connect a pedal to the fo PEDAL1 jack.
Press bk FUNCTION.
Use the [1] (V) and [3] (W) bm number keys
to display "Cntrller", and then press [6]
(ENTER).
Use the [1] (V) and [3] (W) keys to display
"Pedal", and then press [6] (ENTER).
This displays "Pd1Efect". This is the Pedal 1 function
selection mode.
Use bn [–] and [+] or the bl dial to change the
setting value.
• For details about the function that is assigned by each
setting value, refer to the "Pedal Function List" (page
EN-31).
Turn pedal effects on or off for each keyboard
part* as required.
(1) Use the [1] (V) and [3] (W) bm number keys to
display "Pd1Enabl".
(2) Press the [6] (ENTER) bm number key.
(3) Use the [1] (V) and [3] (W) keys to display the
part whose setting you want to change.
(4) Use bn [–] and [+] to switch between on and off.
• The pedal effect is applied to parts that are turned
on, and not applied to parts that are turned off.
• The Auto Harmonize (page EN-51) sound
depends on the UPPER 1 part setting.
When the setting is the way you want, long-
press the [4] (EXIT) bm number key to exit the
setting screen.
EN-29