Editing A Recorded Song In Track Units - Casio CT-X9000IN User Manual

To delete a specific range of measures from a
song
• Performing this procedure deletes the measures in the
specified range, shifting the measures following the deleted
range forward to fill in the space that is created. The total
number of measures in the song is reduced by the number
of measures that are deleted.
1.
Perform the procedure under "To enter the
Song Editing Mode" (page EN-95).
2.
Press the [6] (ENTER) bm number key.
This displays "Clear".
3.
Use the [1] (V) and [3] (W) bm number keys
to display "Delete", and then press [6]
(ENTER).
This displays "Point A".
4.
Use bn [–] and [+], or the bl dial to select the
number of the first measure of the range you
want to delete, and then press [6] (ENTER).
This displays "Point B".
5.
Use bn [–] and [+], or the bl dial to select the
number of the last measure of the range you
want to delete, and then press [6] (ENTER).
This displays "Sure?"
6.
Perform the procedure under "To exit the Song
Editing Mode operation" (page EN-95).
Using the MIDI Recorder to Record
Editing a Recorded Song in Track
Units
The editing operations in this section affect an entire track in a
recorded song.
To delete a specified track
1.
Perform the procedure under "To enter the
Song Editing Mode" (page EN-95).
2.
Use the [1] (V) and [3] (W) bm number keys
to display "WholeTrk", and then press [6]
(ENTER).
This displays "Clear".
3.
Press [6] (ENTER) again.
This displays "Trk Sy"
4.
Use bn [–] and [+] or the bl dial to specify the
target track, and then press [6] (ENTER).
This displays "Sure?"
5.
Perform the procedure under "To exit the Song
Editing Mode operation" (page EN-95).
To copy a specified solo track to another
solo track
1.
Perform the procedure under "To enter the
Song Editing Mode" (page EN-95).
2.
Use the [1] (V) and [3] (W) bm number keys
to display "WholeTrk", and then press [6]
(ENTER).
This displays "Clear".
3.
Use the [1] (V) and [3] (W) keys to display
"Copy", and then press [6] (ENTER).
This displays "SrcTrk 1".
4.
Use bn [–] and [+] or the bl dial to specify the
source track of the copy operation, and then
press [6] (ENTER).
This displays "DstTrk 1".
5.
Use bn [–] and [+] or the bl dial to specify the
destination track of the copy operation, and
then press [6] (ENTER).
This displays "Sure?"
6.
Perform the procedure under "To exit the Song
Editing Mode operation" (page EN-95).
EN-97